/user.svg){kind=small}
/cart.svg){kind=small}
/heart.svg){kind=small}
/compare.svg){kind=small}
%
Akčné ponuky na váš e-mail
INT VROC Prem FIO for DL360/380 Gen10 Plus
Kód: 1577326Na dotaz
Termín a spôsob doručenia
Technológia serverového radiča:SAS+SATA+SATA SSD; RAID:1, 5, 10; Počet kanálov radiča:2.prečítajte si viac
Vyberte si zvýhodnené balenie
Množstevné zľavy
/envelope.svg){kind=small}
Váš dotaz
/bell.svg){kind=small}
Sledovat
/share.svg){kind=small}
Zdieľať
Parametre
Výrobca:
Kód:
1577326
Záruka:
36 Měsíc(ů)
Technologie serverového řadiče:
SAS+SATA+SATA SSD
RAID:
10, 1, 5
Počet kanálů řadiče:
2
Popis INT VROC Prem FIO for DL360/380 Gen10 Plus
INT VROC Prem FIO for DL360/380 Gen10 Plus
| Intel VROC for HPE ProLiant Servers | |
| Intel VROC for HPE ProLiant Servers is an enterprise, hybrid RAID solution, specifically designed for NVMe SSDs connected directly to the CPU. Intel® VROC is made possible by the new CPU feature Intel® Volume Management Device, Intel® VMD, a new hardware architecture on Intel® Xeon® Scalable Processors. Intel® VMD enhances drive performance as drives are directly connect to the Intel CPU enabling the lowest latency. Intel® VROC capitalizes on Intel® VMD for a simple software RAID solution that requires no additional hardware. | |
| Models | |
| Intel Virtual RAID on CPU Premium E-RTU for HPE | R7J59AAE |
| Intel Virtual RAID on CPU Premium FIO Software for HPE | R7J57A |
| Intel Virtual RAID on CPU Standard E-RTU for HPE | SOE38AAE |
| Intel Virtual RAID on CPU Standard FIO Software for HPE NVMe SSDs | S0E37A |
|
|
|
| Notes: -SED and RAID are specific to Intel and drives cannot migrate to be managed by other vendor controllers. -IP and SSA do not support VROC. |
|
| Drives supported Up to 32 NVMe drives (depends on platform and CPU type) | |
| Performance 16Gb/s NVMe (up to 32 drives maximum) | |
Standard Features
| Key Benefits
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Key Features
- Up to 32 NVMe lanes (depends on platform and CPU type)
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Server Compatibility Please refer to the platform QuickSpecs to confirm compatibility for Intel VROC for HPE ProLiant Servers. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Operating Systems
| |
| Notes: *Customers will need to manually inject the driver when doing an O/S install from IP. Please see Intel VROC User Guide for Gen11 for more information. For more information on HPE's server operating systems and virtualization software, please visit: http://www.hpe.com/info/ossupport | |
|
| |
| Drivers Intel VROC is integrated with the HPE BIOS. The Intel VROC solution has two driver components: the pre-boot, or UEFI driver, and the OS driver. The UEFI driver is embedded in the system BIOS and is referred to as the RSTe NVMe UEFI driver, while the OS driver must be loaded at the OS installation time; both contain version numbers. Refer to the Intel VROC User Guide and Installation Instructions for more information. Notes: On a system with the Windows OS installed and an Intel VROC virtual drive present, the Windows RSTe OS driver version must not be prior to the RSTe NVMe UEFI driver version, otherwise unexpected behavior may occur. The RSTe OS driver can be downloaded from the HPE Support Center. |
.